2X-A Series Operation Manual 31
Maintenance
To ensure the correct functioning of your control panel and fire alarm system,
and to comply with all European regulations, perform scheduled maintenance as
described below.
Quarterly maintenance
Contact your installation or maintenance contractor to carry out a quarterly
inspection of the fire alarm system.
This inspection must test at least one device per zone and verify that the control
panel responds to all fault and alarm events.
Annual maintenance
Contact your installation or maintenance contractor to carry out an annual
inspection of the fire alarm system.
This inspection must test all system devices and verify that the control panel
responds to all fault and alarm events. All electrical connections must be visually
inspected to make sure that they are securely fastened, that they have not been
damaged, and that they are appropriately protected.
Cleaning
Keep the outside and inside of the control panel clean. Carry out periodic
cleaning using a damp cloth for the outside. Do not use products containing
solvents to clean the unit. Do not clean the inside of the cabinet with liquid
products.
To Next Page
Loading...
Need help?
General
