Aritech 2X-AF2-FB-PRT-P User Manual

2X-A Series Operation Manual 1
Introduction
This is the operation manual for the 2X-A Series fire alarm, repeater, and
evacuation control panels. Read these instructions and all related documentation
entirely before operating this product.
Firmware compatibility
Information in this document covers control panels with firmware version 4.0 or
later. This document must not be used as a guide to operation of control panels
with an earlier firmware version.
To check the firmware version of your control panel, see the Revision report in
the Reports menu. For more information, see “Viewing reports” on page 28.
Product range
The 2X-A Series includes control panels with the following power options:
• Small cabinet control panels with up to 4 A output
• Large cabinet control panels with up to 6 A output
• Large cabinet control panels with up to 10 A output (-P variants)
The complete range of control panels is shown in the following tables.
Table 1: Small cabinet control panels with up to 4 A output
Model
Description
2X
-AF1-S One-loop addressable fire alarm control panel
2X
-AF1-FB-S One-loop addressable fire alarm control panel with fire routing and fire
protection controls
2X
-AF1-SCFB-S One-loop addressable SS 3654 fire alarm control panel with fire routing
and fire protection controls [1]
2X
-AF2-S Two-loop addressable fire alarm control panel
2X
-AF2-FB-S Two-loop addressable fire alarm control panel with fire routing and fire
protection controls
2X
-AF2-SCFB-S Two-loop addressable SS 3654 fire alarm control panel with fire routing
and fire protection controls [1]
2X
-AFR-S Addressable fire alarm repeater panel
2X
-AFR-FB-S Addressable fire alarm repeater panel with fire routing and fire
protection controls
[1] Includes a fireman's key.

Aritech 2X-AF2-FB-PRT-P Specifications

General

Brand	Aritech
Model	2X-AF2-FB-PRT-P
Category	Smoke Alarm
Language	English