ASROCK G41M-S User Manual

1717
1717
17
2.6 Expansion Slots (PCI and PCI Express Slots)2.6 Expansion Slots (PCI and PCI Express Slots)
2.6 Expansion Slots (PCI and PCI Express Slots)2.6 Expansion Slots (PCI and PCI Express Slots)
2.6 Expansion Slots (PCI and PCI Express Slots)
There are 2 PCI slots and 2 PCI Express slots on this motherboard.
PCI slots: PCI slots are used to install expansion cards that have the 32-bit PCI
interface.
PCIE slots:
PCIE1 (PCIE x1 slot) is used for PCI Express cards with x1 lane width
cards, such as Gigabit LAN card, SATA2 card, etc.
PCIE2 (PCIE x16 slot) is used for PCI Express cards with x16 lane
width graphics cards.
If you install the add-on PCI Express VGA card to PCIE2 (PCIE x16 slot),
the onboard VGA will be disabled. If you install the add-on PCI Express
VGA card to PCIE2 (PCIE x16 slot) and adjust the BIOS options “Primary
Graphics Adapter” to [Onboard] and “Share Memory” to [Auto], then the
onboard VGA will be enabled, and the primary screen will be onboard
VGA.
Installing an expansion cardInstalling an expansion card
Installing an expansion cardInstalling an expansion card
Installing an expansion card
Step 1. Before installing the expansion card, please make sure that the power
supply is switched off or the power cord is unplugged. Please read the
documentation of the expansion card and make necessary hardware
settings for the card before you start the installation.
Step 2. Remove the bracket facing the slot that you intend to use. Keep the screws
for later use.
Step 3. Align the card connector with the slot and press firmly until the card is
completely seated on the slot.
Step 4. Fasten the card to the chassis with screws.

ASROCK G41M-S Specifications

General

Number of memory slots	2
Maximum internal memory	8 GB
Processor socket	LGA 775 (Socket T)
Processor manufacturer	Intel
Compatible processor series	Intel® Celeron®
CPU fan connector	Yes
Number of SATA connectors	4
Number of Parallel ATA connectors	1
Headphone outputs	3
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Firewire (IEEE 1394) ports	0
Audio chip	Realtek ALC662
Power source type	ATX
Audio output channels	5.1 channels
Motherboard form factor	micro ATX
Compatible operating systems	Windows 2000 / XP / XP 64-bit / Vista / Vista 64-bit
BIOS type	AMI
BIOS memory size	64 Mbit
Maximum graphics card memory	352 MB
Networking features	10/100 Mb/s

Summary

Introduction

1.2 Specifications

Details the technical specifications of the motherboard's platform, CPU, chipset, memory, expansion slots, graphics, audio, and I/O ports.

1.3 Motherboard Layout

1.4 I/O Panel

Describes the rear panel connectors and their functions, including multi-streaming audio setup.

Motherboard Installation

2.2 Pre-installation Precautions

Essential safety and handling precautions before installing components to prevent static damage and physical injury.

2.3 CPU Installation

Step-by-step guide for correctly installing the Intel 775-LAND CPU into the motherboard socket.

2.4 Installation of CPU Fan and Heatsink

Instructions for mounting the CPU heatsink and fan, including thermal paste application and connector.

2.5 Installation of Memory Modules (DIMM)

Guide on installing DDR2 memory modules into the DIMM slots, emphasizing dual-channel configuration.

2.6 Expansion Slots (PCI and PCI Express Slots)

Explains the types of expansion slots (PCI, PCIe x1, PCIe x16) and how to install expansion cards properly.

2.7 Jumpers Setup

2.8 Onboard Headers and Connectors

Identifies and describes onboard headers and connectors like FDD, IDE, SATA, USB, and front panel audio for system connection.

2.9 SATAII Hard Disk Setup Guide

Instructions for setting up SATAII hard disks to ensure optimal performance and compatibility with the motherboard.

2.10 Serial ATA (SATA) / Serial ATAII (SATAII) Hard Disks Installation

2.12 Untied Overclocking Technology

BIOS Setup Utility

3.3 Smart Screen

3.4 Advanced Screen

3.4.1 CPU Configuration

Settings for CPU frequency, overclocking mode, and other CPU-related features for performance tuning.

3.4.2 Chipset Configuration

Configuration options for DRAM frequency, timings, and memory remap features for memory performance.

3.4.3 ACPI Configuration

3.4.4 IDE Configuration

3.4.5 PCIPnP Configuration

3.4.8 USB Configuration

3.5 Hardware Health Event Monitoring Screen

Monitoring of system hardware status like CPU temp, fan speed, and voltages for system health.

3.6 Boot Screen

3.7 Security Screen