59
4.2.3 Route
If your network makes use of more than one xDSL modem router,
you can configure a routing table to share the same Internet
service.
NOTE: We recommend that you do not change the default route
settings unless you have advanced knowledge of routing tables.
To configure the LAN Routing table:
1. From the navigation panel, go to Advanced Settings > LAN
> Route tab.
2. On the Enable static routes field, choose Yes .
3. On the Static Route List, enter the network information of
other access points or nodes. Click the Add or Delete
button to add or remove a device on the list.
4. Click Apply.
To Next Page
Loading...
Need help?
General
