EasyManuals Logo
Home>Asus>Motherboard>F2A85-M PRO

Asus F2A85-M PRO User Manual

Asus F2A85-M PRO
165 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #81 background imageLoading...
Page #81 background image
ASUS F2A85-M PRO
3-15
Chapter 3
SVM [Enabled]
Enables or disables CPU virtualization. Conguration options: [Disabled] [Enabled]
CPB Mode [Auto]
Allows you to disable CPB mode function. Conguration options: [Auto] [Disabled]
C6 Mode [Enabled]
Enables or disables C6 mode function. Conguration options: [Disabled] [Enabled]
IOMMU [Disabled]
Enables or disables IOMMU support. Conguration options: [Disabled] [Enabled]
3.5.2 SATA Conguration
While entering Setup, the BIOS automatically detects the presence of SATA devices. The
SATA Port items show Not Present if no SATA device is installed to the corresponding SATA
port.
OnChip SATA Channel [Enabled]
Enables or disables onboard channel SATA port. Conguration options: [Disabled] [Enabled]
OnChip SATA Type [AHCI]
Allows you to set the SATA conguration.
[IDE] Set to [IDE] when you want to use the Serial ATA hard disk drives as
Parallel ATA physical storage devices.
[RAID] Set to [RAID] when you want to create a RAID conguration from the SATA
hard disk drives.
[AHCI] Set to [AHCI] when you want the SATA hard disk drives to use the AHCI
(Advanced Host Controller Interface). The AHCI allows the onboard storage
driver to enable advanced Serial ATA features that increases storage
performance on random workloads by allowing the drive to internally
optimize the order of commands.
SATA Port 5/6/7, ESATA [AHCI]
This item only appears when the OnChip SATA Type is set to [RAID] or [AHCI]. If
Port 5/6/7 are congured as [AHCI], the ports can only be used under OS with driver
installed. Set to [IDE] instead of [AHCI] to access devices on Port 5/6/7 before entering
OS. Conguration options: [AHCI] [IDE]
Board SATA RAID ROM [Legacy ROM]
This item only appears when the OnChip SATA Type is set to [RAID].
[Disabled] Disables this function.
[Legacy ROM] Select this option when using legacy operating systems.
[UEFI DRIVER] Select this option when using UEFI systems.

Table of Contents

Other manuals for Asus F2A85-M PRO

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Asus F2A85-M PRO and is the answer not in the manual?

Asus F2A85-M PRO Specifications

General IconGeneral
Non-ECCYes
Memory channelsDual-channel
Memory slots typeDIMM
Number of memory slots4
Supported memory typesDDR3-SDRAM
Maximum internal memory64 GB
Supported memory clock speeds1066, 1333, 1600, 1866 MHz
Processor socketSocket FM2
Processor manufacturerAMD
Compatible processor seriesAMD A
Maximum number of SMP processors1
Number of SATA III connectors7
Number of Parallel ATA connectors0
USB 2.0 ports quantity2
Audio chipRealtek ALC892
Cooling typePassive
Component forPC
Power source typeATX
Motherboard chipsetAMD A85X
Audio output channels7.1 channels
Motherboard form factormicro ATX
RAID levels0, 1, 5, 10, JBOD
Supported storage drive interfacesSATA III
Graphics cardRadeon HD 7000
DirectX version11
Maximum resolution4096 x 2160 pixels
Maximum graphics card memory2048 MB
Parallel processing technology supportLucidLogix Virtu, Quad-GPU CrossFireX
PCI Express slots version2.0
PCI Express configurations1x16, 2x1, 2x8
Trial softwareAntivirus
Cables includedSATA
Bundled softwareASUS Utilities ASUS Update
LAN controllerRealtek RTL8111F
Ethernet interface typeGigabit Ethernet
BIOS typeUEFI
ACPI version2.0a
BIOS memory size64 Mbit
Weight and Dimensions IconWeight and Dimensions
Width244 mm

Related product manuals