EasyManuals Logo
Home>Asus>Motherboard>F2A85-M PRO

Asus F2A85-M PRO User Manual

Asus F2A85-M PRO
165 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #90 background imageLoading...
Page #90 background image
3-24
Chapter 3: BIOS setup
Chapter 3
USB Support [Partial In...]
[Disabled] All the USB devices will be available only afater entering the operating
system (OS).
[Full Initial] All the USB devices will be available during POST and in OS.
[Partial Initial] Specic USB device / port will be available before entering OS.
PS2 Devices Support [Enabled]
This item allows you to set the PS/2 devices support. Conguration options: [Auto] [Enabled].
Network Stack Driver Support [Disabled]
[Disabled] Disables network stack driver support during POST.
[Enabled] Enables network stack driver support during POST.
3.7.4 Post Logo Delay Time [3 sec]
Allows you to set the Post Logo Delay Time. Conguration options: [0 sec] [1 sec] ~ [10 sec].
3.7.5 Wait for ‘F1’ If Error [Enabled]
When this item is set to [Enabled], the system waits for the F1 key to be pressed when error
occurs. Conguration options: [Disabled] [Enabled]
3.7.6 DirectKey Enable [Go to BIOS...]
[Disabled] Disables the DirectKey function.
[Go to BIOS Setup] Allows the system to power on and go to BIOS setup directly
when you press the DirectKey button.
3.7.7 Option ROM Messages [Force BIOS]
[Force BIOS] The third-party ROM messages will be forced to display during the boot
sequence.
[Keep Current] The third-party ROM messages will be displayed only if the third-party
manufacturer had set the add-on device to do so.
3.7.8 Next boot after AC Power Loss [Normal Boot]
[Normal Boot] Returns to normal boot up process after AC Power Loss.
[Fast Boot] Accelerates the boot up speed after AC Power Loss.
3.7.9 CSM Parameters
This option allows you to control the CSM launch parmeters.
Launch CSM [Enabled]
Conguration option: [Auto] [Enabled] [Disabled]
The following four items appear when Launch CSM is set to [Enabled].
Boot option filter [UEFI and L...]
Conguration option: [UEFI and Legacy] [Legacy only] [UEFI only]

Table of Contents

Other manuals for Asus F2A85-M PRO

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Asus F2A85-M PRO and is the answer not in the manual?

Asus F2A85-M PRO Specifications

General IconGeneral
Non-ECCYes
Memory channelsDual-channel
Memory slots typeDIMM
Number of memory slots4
Supported memory typesDDR3-SDRAM
Maximum internal memory64 GB
Supported memory clock speeds1066, 1333, 1600, 1866 MHz
Processor socketSocket FM2
Processor manufacturerAMD
Compatible processor seriesAMD A
Maximum number of SMP processors1
Number of SATA III connectors7
Number of Parallel ATA connectors0
USB 2.0 ports quantity2
Audio chipRealtek ALC892
Cooling typePassive
Component forPC
Power source typeATX
Motherboard chipsetAMD A85X
Audio output channels7.1 channels
Motherboard form factormicro ATX
RAID levels0, 1, 5, 10, JBOD
Supported storage drive interfacesSATA III
Graphics cardRadeon HD 7000
DirectX version11
Maximum resolution4096 x 2160 pixels
Maximum graphics card memory2048 MB
Parallel processing technology supportLucidLogix Virtu, Quad-GPU CrossFireX
PCI Express slots version2.0
PCI Express configurations1x16, 2x1, 2x8
Trial softwareAntivirus
Cables includedSATA
Bundled softwareASUS Utilities ASUS Update
LAN controllerRealtek RTL8111F
Ethernet interface typeGigabit Ethernet
BIOS typeUEFI
ACPI version2.0a
BIOS memory size64 Mbit
Weight and Dimensions IconWeight and Dimensions
Width244 mm

Related product manuals