ASUS K8N-LR 5-7
5.2.4 Creating a RAID 1 set (Mirror)
To create a RAID 1 set:
1. From the Define a New Array menu, select RAID Mode, then press
<Enter>. A pop-up menu appears.
2. Use the up or down arrow keys to select
Mirroring, then press <Enter>.
5. Press <TAB> to move to the Free Disks section.
6. Highlight the hard disk drives that you want to add in the RAID set,
then press the right arrow key to select. The selected hard disk drives
appear in the Array Disks section. Repeat the process until all desired
hard disk drives are added.
Clear disk data?
[Y] YES [N] Cancel
7. After selecting the hard disk drives, press
<F7> to create the RAID 1 set. A pop-up
window appears.
8. Press <Y> to delete all data from the hard disk drives and continue
creating the RAID set. Press <N> to backup exisitng data to a target
hard disk drive.
You will lose all data on the drives if you clear the disk data!
9. The utility displays the created RAID 1 set. Press <Ctrl+X> to save
your settings and exit the utility.0
[F6] Back [F7] Finish [TAB] Navigate [↑↓] Select [ENTER] Popup
NVIDIA RAID Utility Oct 5 2004
- Define a New Array -
RAID Mode: Mirroring Striping Block: Optimal
Free Disks Array Disks
Loc Disk Model Name Loc Disk Model Name
1.0.M XXXXXXXXXXXXXXXXXX 1.0.M XXXXXXXXXXXXXXXXXX
1.1.M XXXXXXXXXXXXXXXXXX [→] Add
2.0.M XXXXXXXXXXXXXXXXXX
2.1.M XXXXXXXXXXXXXXXXXX
[←] Del
Mirroring
Striping
Stripe Mirroring
Spanning
RAID 5
To Next Page
Loading...
Need help?
General
