4-16 Chapter 4: BIOS setup
IDE Detect Time Out [35]
Selects the time out value for detecting ATA/ATAPI devices.
Configuration options: [0] [5] [10] [15] [20] [25] [30] [35]
ATA(PI) 80Pin Cable Detection [Host]
Selects the mechanism for detecting 80Pin ATA(PI) Cable.
Configuration options: [Host & Device] [Host] [Device]
First Boot Device from [P-ATA]
Selects the First Boot Device. Configuration options: [P-ATA] [S-ATA]
Configuration nVidia RAID ROM
Configuration nVidia RAID ROM
RAID Option ROM [Disabled]
Disable/Enable nVidia
ROM.
RAID Option ROM [Disabled]
Enables or disables the NVIDIA
®
RAID option ROM.
Configuration options: [Disabled] [Enabled]
The following items appear when the RAID Option ROM is Enabled.
Third Master as RAID [Disabled]
Sets the third master interface as RAID.
Configuration options: [Disabled] [Enabled]
Fourth Master as RAID [Disabled]
Sets the fourth master interface as RAID.
Configuration options: [Disabled] [Enabled]
Fifth Master as RAID [Disabled]
Sets the fifth master interface as RAID.
Configuration options: [Disabled] [Enabled]
Sixth Master as RAID [Disabled]
Sets the sixth master interface as RAID.
Configuration options: [Disabled] [Enabled]
To Next Page
Loading...
Need help?
General
