ASUS K8N motherboard
2-25
2.5.5 APM Configuration
PME Resume [Disabled]
RI Resume [Disabled]
Onboard LAN Resume [Disabled]
RTC Resume [Disabled]
Resume On PS/2 Keyboard [Disabled]
Restore On PS/2 Mouse [Disabled]
Restore on AC Power Loss [Power Off]
PME Resume [Disabled]
Allows you to enable or disable the PME# to generate a wake event. This feature
requires an ATX power supply that provides at least 1A on the +5VSB lead.
Configuration options: [Disabled] [Enabled]
RI Resume [Disabled]
Allows you to enable or disable the RI to generate a wake event. This feature
requires an ATX power supply that provides at least 1A on the +5VSB lead.
Configuration options: [Disabled] [Enabled]
Onboard LAN Resume [Disabled]
Allows you to enable or disable the onboard LAN to generate a wake event. This
feature requires an ATX power supply that provides at least 1A on the +5VSB lead.
Configuration options: [Disabled] [Enabled]
RTC Resume [Disabled]
Allows you to enable or disable RTC to generate a wake event. When this item is
set to Enabled, the items RTC Alarm Date, RTC Alarm Hour, RTC Alarm Minute,
and RTC Alarm Second appear with set values. This feature requires an ATX
power supply that provides at least 1A on the +5VSB lead.
Configuration options: [Disabled] [Enabled]
Resume On PS/2 Keyboard [Disabled]
Allows you to enable or disable the keyboard wake-up feature. This feature
requires an ATX power supply that provides at least 1A on the +5VSB lead.
Configuration options: [Disabled] [Enabled]
Resume On PS/2 Mouse [Disabled]
When set to [Enabled], this parameter allows you to use the PS/2 mouse to
resume the system. This feature requires an ATX power supply that provides at
least 1A on the +5VSB lead. Configuration options: [Disabled] [Enabled]
To Next Page
Loading...
Need help?
General
