Asus K8N User Manual

2-30 Chapter 2: BIOS Setup
2.6.4 Security
The Security menu items allow you to change the system security settings. Select
an item then press <Enter> to display the configuration options.
Security Settings
Supervisor Password : Not Installed
User Password : Not Installed
Change Supervisor Password
Change User Password
Clear User Password
<Enter> to change
password.
<Enter> again to
disable password.
Bootup Num-Lock [On]
Allows you to select the power-on state for the NumLock.
Configuration options: [Off] [On]
PS/2 Mouse Support [Auto]
Allows you to enable or disable support for PS/2 mouse.
Configuration options: [Disabled] [Enabled] [Auto]
Wait for ‘F1’ If Error [Enabled]
When set to Enabled, the system waits for F1 key to be pressed when error
occurs. Configuration options: [Disabled] [Enabled]
Hit ‘DEL’ Message Display [Enabled]
When set to Enabled, the system displays the message “Press DEL to run Setup”
during POST. Configuration options: [Disabled] [Enabled]
Interrupt 19 Capture [Disabled]
When set to [Enabled], this function allows the option ROMs to trap Interrupt 19.
Configuration options: [Disabled] [Enabled]
Change Supervisor Password
Select this item to set or change the supervisor password. The Supervisor
Password item on top of the screen shows the default Not Installed. After you
have set a password, this item shows Installed.

Asus K8N Specifications

General

Form Factor	ATX
Chipset	NVIDIA nForce3 250
Socket	Socket 754
Memory Type	DDR
Memory Slots	3
Maximum Memory	3 GB
AGP Slot	1 x AGP 8x
PCI Slots	5
SATA Ports	2
IDE Ports	2
LAN	10/100 Mbps Ethernet
Supported CPUs	AMD Athlon 64, AMD Sempron
USB Ports	8 (4 on back panel, 4 via headers)
Audio	6-channel audio