5-26 Chapter 5: Software support
Deleting a RAID set
Take caution when deleting a RAID set. You will lose all data on the hard
disk drives when you delete a RAID set.
To delete a RAID set:
1. From the utility main menu, select 2. Delete RAID Volume, then press
<Enter> to display this screen.
2. Use the up/down arrow key to select the RAID set you want to delete,
then press <Del>. This window appears.
Intel(R) Matrix Storage Manager Option ROM v5.0.0.1032 ICH7R wRAID5
Copyright(C) 2003-05 Intel Corporation. All Rights Reserved.
[ DELETE VOLUME MENU ]
Name Level Drives Capacity Status Bootable
Volume0 RAIDX(xxxxx) X XXX.XGB Normal Yes
[ HELP ]
Deleting a volume will destroy the volume data on the drive(s) and
cause any member disks to become available as non-RAID disks.
WARNING: EXISTING DATA WITHIN THIS VOLUME WILL BE LOST AND NON-RECOVERABLE.
[↑↓]-Select [<ESC>]-Previous Menu [<Del>]-Delete Volume
3. Press <Y> to delete the RAID set and return to the utility main menu;
otherwise, press <N> to return to the Delete Volume menu.
ALL DATA IN THE VOLUME WILL BE LOST!
Are you sure you want to delete volume “VolumeX”? (Y/N):
[ DELETE VOLUME VERIFICATION ]
To Next Page
Loading...
Need help?
General
