Asus P4P800 SE User Manual

ASUS P4P800 SE motherboard 5-7
5.3.1 ASUS MyLogo2™
The ASUS MyLogo2™ is automatically installed when you install the
ASUS Update utility from the software menu. See section “5.2.3 Utilities
menu”.
1. Launch the ASUS Update utility.
See section “4.1.6 ASUS Update.”
2. When prompted for the BIOS
update method, select the option
“Update BIOS from a file.”
3. Specify the location of the BIOS
file, such as from a floppy disk.
Click Next.
Follow these steps to use ASUS MyLogo2.
5.3 Software Information
Most of the applications in the support CD have wizards that will
conveniently guide you through the installation. View the online help or
readme file that came with the software for more information.
This section provides details on the software applications that the
motherboard supports.
Before using ASUS MyLogo2™ feature, use the AFUDOS utility to
make a copy of your original BIOS file, or obtain the latest BIOS
version from the ASUS website.
Make sure that the BIOS Item Full Screen Logo is set to [Enabled] if
you wish to use ASUS MyLogo2. See section “4.6.2 Boot Settings
Configuration”.

Asus P4P800 SE Specifications

General

I/O ports	1 x Parallel 1 x Serial 1 x S/PDIF Output 1 x PS/2 Keyboard 1 x PS/2 Mouse 1 x Audio I/O 1 x RJ45 4 x USB 2.0/1.1
Controller interface type	UltraDMA 100/66/33, Serial ATA, RAID 0, 1
Motherboard form factor	ATX
Networking features	Marvell 88E8001 Gigabit Lan Controller 10/100/1000 BASE-T
Bundled software	Drivers ASUS PC Probe ASUS AI Booster Trend Micro PC-cillin anti-virus software (OEM version) ASUS LiveUpdate Utility
Processor socket	Socket 478
Processor manufacturer	Intel