EasyManuals Logo
Home>Asus>Motherboard>P5B-VM

Asus P5B-VM User Manual

Asus P5B-VM
101 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #79 background imageLoading...
Page #79 background image
2-28 Chapter 2: BIOS setup
2.5.5 APM Conguration
APM Conguration
Restore on AC Power Loss [Power Off]
Power On By RTC Alarm [Disabled]
Power On By External Modems [Disabled]
Power On By PCI Devices [Disabled]
Power On By PCIE Devices [Disabled]
Power On By PS/2 Keyboard [Disabled]
Power On By PS/2 Mouse [Disabled]
Restore on AC Power Loss [Power Off]
When set to Power Off, the system goes into off state after an AC power loss.
When set to Power On, the system goes on after an AC power loss. When set to
Last State, the system goes into either off or on state, whatever the system state
was before the AC power loss.
Conguration options: [Power Off] [Power On] [Last State]
Power On By RTC Alarm [Disabled]
Allows you to enable or disable RTC to generate a wake event. When this item is
set to Enabled, the items RTC Alarm Date, RTC Alarm Hour, RTC Alarm Minute,
and RTC Alarm Second appear with set values. Conguration options: [Disabled]
[Enabled]
Power On By External Modems [Disabled]
This allows either settings of [Enabled] or [Disabled] for powering up the computer
when the external modem receives a call while the computer is in Soft-off mode.
Conguration options: [Disabled] [Enabled]
The computer cannot receive or transmit data until the computer and
applications are fully running. Thus, connection cannot be made on the rst
try. Turning an external modem off and then back on while the computer is off
causes an initialization string that turns the system power on.
Power On By PCI Devices [Disabled]
When set to [Enabled], this parameter allows you to turn on the system through a
PCI LAN or modem card. This feature requires an ATX power supply that provides
at least 1A on the +5VSB lead. Conguration options: [Disabled] [Enabled]
Power On By PCIE Devices [Disabled]
When set to [Enabled], this parameter allows you to turn on the system through a
PCIE LAN or modem card. This feature requires an ATX power supply that provides
at least 1A on the +5VSB lead. Conguration options: [Disabled] [Enabled]

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Asus P5B-VM and is the answer not in the manual?

Asus P5B-VM Specifications

General IconGeneral
ECCNo
Number of memory slots4
Maximum internal memory8 GB
Processor socketLGA 775 (Socket T)
Maximum number of SMP processors1
USB 2.0 connectors3
S/PDIF out connectorYes
Number of SATA connectors5
Special features- ASUS AI Gear - ASUS AI Nap - ASUS Advanced Q-Fan - ASUS Q-Connector - ASUS CrashFree BIOS 3 - ASUS EZ Flash 2 - ASUS C.P.R. - ASUS MyLogo 2
Manageability featuresWfM 2.0, DMI 2.0, WOL by PME, WOR by PME, PXE, RPL
Controller interface typeJMicron JMB363 PATA & SATA
PS/2 ports quantity2
DVI-D ports quantity0
USB 2.0 ports quantityUSB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Audio chipADI AD1988
Power source typeATX
Audio output channels7.1 channels
Motherboard form factormicro ATX
Compatible operating systemsWindows
Bundled softwareASUS PC Probe II ASUS Update Anti-Virus
Networking featuresGigabit Ethernet
BIOS memory size64 Mbit
RAID levels0, 1, JBOD
Parallel processing technology supportNot supported
Weight and Dimensions IconWeight and Dimensions
Width245 mm

Related product manuals