4-30 Chapter 4: BIOS setup
4.5.4 APM Conguration
Restore on AC Power Loss [Power Off]
When set to Power Off, the system goes into off state after an AC power loss.
When set to Power On, the system goes on after an AC power loss. When set to
Last State, the system goes into either off or on state, whatever the system state
was before the AC power loss.
Conguration options: [Power Off] [Power On] [Last State]
Power On By RTC Alarm [Disabled]
Allows you to enable or disable RTC to generate a wake event. Conguration
options: [Disabled] [Enabled]
The succeeding items appear when the Power On By RTC Alarm item is set to
Enabled.
RTC Alarm Date
To set the alarm date, highlight this item and press the <+> or <-> key to
make the selection. Conguration options: [Everyday] [1] [2] [3]... ~ [31]
RTC Alarm Hour
To set the alarm hour, highlight this item and press the <+> or <-> key to
make the selection. Conguration options: [00] [1]... ~ [23]
APM Conguration
Restore on AC Power Loss [Power Off]
Power On By RTC Alarm [Disabled]
Power On By External Modems [Disabled]
Power On By PCI Devices [Disabled]
Power On By PCIE Devices [Disabled]
Power On By PS/2 Keyboard [Disabled]
Power On By PS/2 Mouse [Disabled]
Go into On/Off,
or Suspend when
Power button
is pressed.
To Next Page
Loading...
Need help?
General
