2-20
Chapter 2: Hardware setup
Chapter 2
2.7 Expansion cards
The system is designed with an expansion card lock on the rear panel for you to
install or remove an expansion card in less steps.
Ensure to unplug the power cord before installing or removing expansion cards.
Failure to do so may cause severe damage to the motherboard and other
system components!
2.7.1 Installing an expansion card
1. Before installing the expansion card, read the documentation that came with
it and make the necessary hardware settings for the card.
2. Lay the system on its side on a at, stable surface.
a
4. Remove the metal slot cover
opposite the slot where you wish to
install an expansion card.
b
3. Push down the expansion card
lock latch (step a) and lift up the
expansion card lock (step b), as
shown in the right gure.
To Next Page
Loading...
Need help?
General