5-4
Chapter 5: BIOS setup
Chapter 5
4. The utility veries the le, then starts updating the BIOS le.
DO NOT shut down or reset the system while updating the BIOS to prevent
system boot failure!
5. The utility returns to the DOS prompt after the BIOS update process is
completed. Reboot the system from the hard disk drive.
The BIOS update is nished! Please restart your system.
C:\>
ASUSTek BIOS Update for DOS V1.06 (09/08/04)
Current ROM
Update ROM
Note
Writing BIOS:
FLASH TYPE: MXIC 25L1605A
PATH:
BOARD: Z9PA-D8
VER: 0203
DATE: 08/04/2012
BOARD: Z9PA-D8
VER: 0206
DATE: 08/04/2012
WARNING! Do not turn off power during ash BIOS
To Next Page
Loading...
Need help?
General