Asus VS278 Series User Manual

1-2 Chapter 1: Product introduction
1.3 Monitor introduction
 
1 2 6 7 743 5
1. button:
• Activates the QuickFit function.(Please refer to 1.3.3 QuickFit Function).
2. button:
• Selects a desired preset mode.
• Exits the OSD menu or goes back to the previous menu when the OSD
menu is active.
• Automatically adjusts the image to its optimized position, clock, and phase
by pressing this button for 2-4 seconds (for VGA mode only).
3. button:
• Decreases values or moves your selection left/down.
• Volume hotkey
4. MENU button:
• Turns on the OSD menu. Enacts the selected OSD menu item.
5. button:
• Increases values or moves your selection right/up.
• Brightness hotkey
6. button:
• Selects an available input source.
Press (Input Select button) to display HDMI/DisplayPort signals after you
connect HDMI/DisplayPort cable with the monitor.

Asus VS278 Series Specifications

General

Screen Size	27 inches
Resolution	1920 x 1080 (Full HD)
Panel Type	TN
Refresh Rate	60 Hz
Response Time	1 ms (GTG)
Aspect Ratio	16:9
Brightness	300 cd/m²
Contrast Ratio	1000:1
Viewing Angle	170°(H)/160°(V)
Dynamic Contrast Ratio	80, 000, 000:1
Ports	HDMI, DVI, VGA