Asus WL-330N3G User Manual

5-3ASUS WL-330N3G Mobile Wireless Router
5.3 Replacing the cable connections of other
devices
You can also use the WL-330N3G to replace your Xbox, PlayStation
®
2, orset-top
box network cable connection.
To do this:
1. Switch the WL-330N3G to Ethernet adapter mode using the mode switch.
(Default SSID: ASUS)
2. Place the WL-330N3G nearest the AP you wish to connect, then turn on the
device.
3. Connect one end of the supplied RJ-45 cable to the Ethernet port of the device
and the other end to the Xbox, PlayStation
®
2, or set-top box Ethernet port.
4. Set the IP address of the Xbox, PlayStation
®
2, or set-top box toestablish
connection to the local network. Verify your connection.
5.4 Sharing Internet connection with other
computers
Refer to the typical network conguration below and the table on the next page for
information on Internet connection sharing with other computers in your ofce or
home network.
Set the WL-330N3G to AP mode before sharing an Internet connection with
other computers in your network.
Wireless computerInternet
˝
ADSL/Cable modem
WL-330N3G

Asus WL-330N3G Specifications

General

Brand	Asus
Model	WL-330N3G
Category	Wireless Router
Language	English