4-14 Chapter 4: BIOS setup
PIO Mode [Auto]
Selects the PIO mode. Conguration options: [Auto] [0] [1] [2] [3] [4]
DMA Mode [Auto]
Selects the DMA mode.
Conguration options: [Auto] [SWDMA0] [SWDMA1] [SWDMA2] [MWDMA0]
[MWDMA1] [MWDMA2] [UDMA0] [UDMA1] [UDMA2] [UDMA3] [UDMA4] [UDMA5]
[UDMA6]
SMART Monitoring [Auto]
Sets the Smart Monitoring, Analysis, and Reporting Technology.
Conguration options: [Auto] [Disabled] [Enabled]
32Bit Data Transfer [Disabled]
Enables or disables 32-bit data transfer.
Conguration options: [Disabled] [Enabled]
ATA/IDE Conguration [Enhanced]
Allows you to select the IDE Conguration.
Conguration options: [Disabled] [Compatible] [Enhanced]
Legacy IDE Channels [SATA Pri, PATA Sec]
This sub-item appears only when you set the
ATA/IDE Conguration
item to
[Compatible] and allows you to set the legacy IDE channels mode.
Conguration options: [SATA Only] [PATA Pri, SATA Sec] [SATA Pri, PATA
Sec] [PATA Only]
• When set to [PATA Pri, SATA Sec], SATA port 1 and 3 will be disabled, and
SATA port 2 and 4 will be enabled as Secondary Master and Secondary
Slave respectively.
• When set to [SATA Pri, PATA Sec,] SATA port 2 and 4 will be disabled, and
SATA port 1 and 3 will be enabled as Secondary Master and Secondary
Slave respectively.
4.3.6 Storage Conguration
The items in this menu allow you to set or change the congurations for the IDE
devices installed in the system. Select an item then press <Enter> if you wish to
congure the item.
IDE Conguration
ATA/IDE Conguration [Enhanced]
Congure SATA as [IDE]
Options
Disable
Compatible
Enabled
To Next Page
Loading...
Need help?
General
