4.6. Automatic mode
Display example:
Characteristics:
¾The screen display informs users as to whether the appliance is in automatic mode and
displays the current program.
¾The day of the week is displayed on the left of the screen and the current time flashing at
the bottom.
¾The room temperature is displayed.
¾The flame symbol shows whether the heating element is connected or not.
4.7. Programing Function:
- Press the
button quickly to enable the programing function.
- Keep the
button pressed down in any Mode to enter the programing configuration
mode to:
1. Create a Comfort/Eco schedule Program.
Press the button to view the Programs saved to the memory and the day of the week
on the vertical scale (from 1 to 7).
Press the button to go from one stage to the next.
2. Setting the clock.
Once the 7 days of the week have been Programed, the next parameter to be displayed
is the time, which is adjusted using the (+) (-) buttons.
4.8. Program creation
Keep the
button pressed down in any mode to modify the Programs.
The indication PROG is displayed over the 4 digits on the screen on entering this mode.
To Program, press the (-) button to select the ECONOMY periods and the (+) button to
select the COMFORT periods.
A “double bar” (1 bar = ECONOMY, Double bar = COMFORT) is displayed on the screen
in this mode.
The adjustment position is displayed in the form of the corresponding flashing pictogram.
Each position represents a one-hour period.
If no button is pressed for 120s, the thermostat will return to functional mode with the new
program saved.
7
To Next Page
Loading...
Need help?
General
