Impact unit
Cobra PROi
Impact energy 60 J at 1440 bpm
Lubrication Impact mechanism through separate oil bath
Oil type for impact unit Atlas Copco IMPACT-OIL
Oil capacity, litres (oz) 0.1 (3.38)
Oil consumption, litres/hour (oz/hour) 0.005 (0.17)
Noise and vibration declaration statement
Guaranteed sound power level Lw according to EN ISO 3744 in accordance with directive 2000/14/EC.
Sound pressure level Lp according to EN ISO 11203.
Vibration value A and uncertainty B determined according to EN ISO 28927-10. See table ”Noise and
vibration data” for the values of A, B, etc.
These declared values were obtained by laboratory type testing in accordance with the stated directive or
standards and are suitable for comparison with the declared values of other tools tested in accordance with
the same directive or standards. These declared values are not suitable for use in risk assessments and
values measured in individual work places may be higher. The actual exposure values and risk of harm
experienced by an individual user are unique and depend upon the way the user works, in what material the
machine is used, as well as upon the exposure time and the physical condition of the user, and the condition
of the machine.
We, Construction Tools PC AB, cannot be held liable for the consequences of using the declared values,
instead of values reflecting the actual exposure, in an individual risk assessment in a work place situation
over which we have no control.
This tool may cause hand-arm vibration syndrome if its use is not adequately managed. An EU guide to
managing hand-arm vibration can be found at http://www.humanvibration.com/humanvibration/EU/
VIBGUIDE.html
We recommend a programme of health surveillance to detect early symptoms which may relate to vibration
exposure, so that management procedures can be modified to help prevent future impairment.
Noise and vibration data
Noise Vibration
Declared values Declared values
Sound pressure Sound power Three axes values
EN ISO 11203 2000/14/EC EN ISO 28927-10
Type Lp
r=1m dB(A) rel
20µPa
Lw
guaranteed dB(A) rel
1pW
A
m/s
2
value
B
m/s
2
spreads
Cobra PROi 97 109 3.3 0.8
COBRA PROi Safety and operating instructions
© Construction Tools PC AB | 9800 1758 01 | 2017-01-10
Original instructions
21
To Next Page
Loading...
Need help?
General
