2
Guaranteed sound power according to EN ISO 3744 in accordance with directive 2000/14/EC inclusive spread
in production.
These declared values were obtained by laboratory type testing in accordance with the stated directive or
standards and are suitable for comparison with the declared values of other tools tested in accordance with
the same directive or standards. These declared values are not adequate for use in risk assessments and
values measured in individual work places may be higher. The actual exposure values and risk of harm
experienced by an individual user are unique and depend upon the way the user works, in what material the
breaker is used, as well as upon the exposure time and the physical condition of the user, and the condition of
the breaker.
We, Atlas Copco, cannot be held liable for the consequences of using the declared values, instead of values
reflecting the actual exposure, in an individual risk assessment in a work place situation over which we have
no control.
© 2012 Atlas Copco Construction Tools GmbH | No. 3390 5005 01 | 2012-05-03
Original instructions
68
HB 5800, 5800 DP, 7000, 7000 DP, 10000 DPTECHNICAL SPECIFICATIONS
To Next Page
Loading...
Need help?
General
