LTV38 R..TS/..TAS
Printed Matter No.9836 1857 00 Angle nutrunner
2017-01-20
Original Product instructions
LTV 37 SR007-10-TS (13 - 27 Nm) 8431 0544 02
LTV 37 SR006-10-TS (18 - 32 Nm) 8431 0544 03
LTV 37 SR002-L13-TS (40 - 85 Nm) 8431 0544 04
LTV 37 SR005-10-TS (20 - 42 Nm) 8431 0544 70
LTV 37 SR005-13-TS (20 - 42 Nm) 8431 0544 73
LTV 37 SR004-10-TS (28 - 50 Nm) 8431 0544 88
LTV 37 SR004-13-TS (28 - 50 Nm) 8431 0544 96
LTV37 SR004A-13-TS (30 - 60 Nm) 8431 0544 97
LTV37 SR003-13-TS (34 - 70 Nm) 8431 0544 99
LTV37 SR007-10-TAS (13 - 27 Nm) 8431 0560 05
LTV37 SR006-10-TAS (18 - 32 Nm) 8431 0560 06
LTV37 SR005-10-TAS (20 - 42 Nm) 8431 0560 07
LTV37 SR004-10-TAS (28 - 50 Nm) 8431 0560 08
LTV37 SR004-13-TAS (28 - 50 Nm) 8431 0560 09
LTV37 SR003-13-TAS (34 - 70 Nm) 8431 0560 10
LTV37 SR002-L13-TAS (40 - 85
Nm)
8431 0560 11
LTV37 SR005-13-TAS (20 - 42 Nm) 8431 0560 72
LTV37 SR004A-13-TAS (30 - 60
Nm)
8431 0560 74
WARNING
To reduce risk of injury, everyone using, in-
stalling, repairing, maintaining, changing acces-
sories on, or working near this tool MUST read
and understand these instructions before per-
forming any such task.
DO NOT DISCARD - GIVE TO USER
To Next Page
Need help?
General
