Atlas Copco WEDA 30 User Manual

- 10 -
General description
WEDA dewatering pumps are electrical submersible
pumps for dewatering applications in construction
sites, industry, mining, tanks, pools etc. The range
consists of several dewatering pumps, all designed for
though pumping in demanding applications. The
compact design and light weight make the pumps
very versatile and easy to install.
The design with outer jacket for cooling and motor
protector keeps the pump running safely under
various conditions. The double mechanical seal runs
in an oil bath and assures a long life time.
Features:
• Dry running capability. Motor protector.
• Plug and pump. Built-in high torque capacitor
(1ph).
• The double mechanical seal runs in an oil bath and
assures a long life time.
• Impeller from high chrome steel minimizes
maintenance.
• The bearings are greased for life with high
temperature grease and anti-corrosion additive.
WEDA 30 and 40 are compact versatile dewatering
pumps for various pumping needs. The high chrome
steel impeller is designed to handle the water in
construction sites, manholes and industrial pits etc.
with very low risk of clogging.
HOUSING AND WET END
The housing is made of aluminium and parts of wet
end are rubber lined.
IMPELLER
The WEDA 30 and 40 pumps are equipped with a
high chrome steel impeller.
OVERLOAD PROTECTION
The pump is supplied with an automatically resetting
thermal overload protection.
Main parts
Reference Name
1Cable
2Plug
3 Coupling
4 Discharge
5 Grease nipple
6Strainer
7Handle
8 Float switch (option)
9 Holder for float switch
10 Data plate
1
2
3
4
5
6
10
7
8
9

Atlas Copco WEDA 30 Specifications

General

Brand	Atlas Copco
Model	WEDA 30
Category	Water Pump
Language	English