- 12 -
ZINC ANODES
470W209289 - Zinc anode kit
When pumping salt water (which is highly aggressive
towards aluminium), the pump should be protected
with zinc anodes.
EPOXY COATING
8162171300 - Epoxy coating
For optimum protection when pumping salty water,
water containing aggressive substances, or water with
a high or low pH value the pump can be protected
with an epoxy resin coating.
LOW SUCTION COLLAR
470W224848 - Low suction collar
The low suction collar allows you to pump residual
water all the way down to 3 mm.
The low suction collar is made of rubber and is placed
over the strainer.
If the low suction collar is placed 5 mm to the ground,
the water can be pumped down to a residual amount
of 3 mm.
DISCHARGES
The pump can be equipped with several discharges,
see table above.
Reference Name
1Zinc anode
2Zinc anode
Discharge Part number
3” Hose standard with 1 clamp 470W203562
3” BSP - thread 470W203484
3” NPT - thread 470W203570
4” Hose standard with 1 clamp 470W203564
4” BSP - thread 470W203482
4” NPT - thread 470W203572
3” Cam lock adapter 8162164100
3” Cam lock coupling 8162164300
3” Storz coupling 470W157011
4” Storz coupling 470W157012
To Next Page
Loading...
Need help?
General
