Introduction
This section briefly describes the possibilities of the CPA12 - 24 - 36 power amplifier.
he CPA12 - 24 - 36 was developed as an easy to use, flexible solution for multifunctional
use.
During the development of the CPA-series, the AUDAC-engineers wanted to achieve four goals:
- Delivering a flexible audio solution to control multiple functions
- Offering a user-friendly device
- Guaranteeing an excellent sound quality
- Creating a modern and advanced design
The CPA12 - 24 - 36 was designed for operation on AC Mains or DC 24V evacuations. Its
protection circuit protects it against current limiting, over current and overheating. The CPA-series
has a built-in high temperature detection, an auto muting function and one line input and one link
output with XLR jacks. These amplifiers are equipped with a low impedance (4Ω) and constant
voltage (70V, 100V) output with EURO block terminal, a built-in 400Hz high-pass filter and a
power output of 120W for the CPA12; 240W for the CPA24 and 360W for the CPA36. They
have a frequency range of 40Hz to 16kHz ± 3dB, a low distortion and low noise level and an
adjustable input level (from -12dB to 0dB).
The CPA-series can be mounted in a 19 inch rack and can be expanded by adding a power
amplifier with LINK terminal.
These power amplifiers can be used in commercial as well as industrial applications such as
restaurants, hotels, shop floors, factories, warehouses, professional offices, public buildings, …
To Next Page
Loading...
Need help?
General
