Audio Technica AT2020USB-X User Manual

4
Part names and functions
Microphone
➊ Microphone
➋ Mute indicator lamp
Lights blue when audio input is enabled. It lights red when the microphone is muted.
➌ Mix control dial
Adjusts the balance of the volume level of the sound coming from the computer and the monitored volume level of the
audio being input (voice).
➍ Touch sensor for mute
Turns the muting of the microphone on/off.
➎ Headphone level control dial
Adjusts volume of headphone output.
➏ USB terminal (USB Type-C™)
Use to connect the included USB cable.
❼ 3/8” Stand mounting screw hole
Use when attaching the stand.
❽ Headphone jack (3.5 mm (1/8") stereo mini-jack)
Use to connect headphones.

Audio Technica AT2020USB-X Specifications

General

Cable length	2 m
Control type	Buttons, Rotary
Plug and Play	Yes
Product color	Black
Windows operating systems supported	Windows 10, Windows 11, Windows 8.1
Power source	USB
Input voltage	5 V
Device interface	3.5 mm (1/8\
USB connector type	USB Type-C
Connectivity technology	Wired
Cables included	USB Type-C to USB Type-A
Number of products included	1 pc(s)
Type	PC microphone
Bit rate	24 bit
Sample rate	96 kHz
Volume control	Rotary
Voice coil type	Dynamic
Microphone frequency	20 - 20000 Hz
Microphone Total Harmonic Distortion (THD)	1 %
Output impedance	32 Ω

Weight and Dimensions

Height	142 mm
Diameter	52 mm
Microphone weight	373 g