Audio Technica AT2020USB-X User Manual

52
Specifications
System requirements
USB 2.0 compliant
Supported OS
Windows 8.1, Windows 10, Windows 11
macOS Catalina, macOS Big Sur, macOS Monterey
(Please check the product's web page for the latest information.)
Element
Fixed-charge back plate, permanently polarized condenser
Polar pattern
Cardioid
Frequency response
20-20,000 Hz
Power supply
USB power (5 VDC)
Bit depth
16 bit/24 bit
Supported sampling rates
44.1 kHz/48 kHz/88.2 kHz/96 kHz
Controls
Headphone level control, Mix control, Mute
Dimensions
142 mm (5.6") long, 52 mm (2.0") maximum body diameter
Weight
About 373 g (13 oz)
Output connector
USB Typ e-C
Headphone output
110 mW (at 1 kHz, 1% T.H.D., 32 ohms)
Headphone jack
3.5 mm (1/8") stereo mini-jack
Included accessories
Stand (AT8702), 3/8"-16 to 5/8"-27 threaded adapter, USB cable (about 2.0 m
(6.6'), USB Type-C to USB Type-A), USB conversion adapter (USB Type-A to
USB Typ e-C)
• For product improvement, the product is subject to modification without notice.

Audio Technica AT2020USB-X Specifications

General

Cable length	2 m
Control type	Buttons, Rotary
Plug and Play	Yes
Product color	Black
Windows operating systems supported	Windows 10, Windows 11, Windows 8.1
Power source	USB
Input voltage	5 V
Device interface	3.5 mm (1/8\
USB connector type	USB Type-C
Connectivity technology	Wired
Cables included	USB Type-C to USB Type-A
Number of products included	1 pc(s)
Type	PC microphone
Bit rate	24 bit
Sample rate	96 kHz
Volume control	Rotary
Voice coil type	Dynamic
Microphone frequency	20 - 20000 Hz
Microphone Total Harmonic Distortion (THD)	1 %
Output impedance	32 Ω

Weight and Dimensions

Height	142 mm
Diameter	52 mm
Microphone weight	373 g