Audio Technica AT2020USB-X User Manual

8
Computer settings (Windows)
For Windows 11
1
Use the USB cable to connect the product to a computer.
2
Confirm that the mute indicator lamp on the product lights.
• The computer automatically recognizes the product and the driver is installed on the computer. In the lower
right part of the screen, a message appears indicating that new hardware has been found or a notification
appears indicating that the driver software has been installed.
3
Click "Start Menu" and select "Settings".
4
Select "System".

Audio Technica AT2020USB-X Specifications

General

Cable length	2 m
Control type	Buttons, Rotary
Plug and Play	Yes
Product color	Black
Windows operating systems supported	Windows 10, Windows 11, Windows 8.1
Power source	USB
Input voltage	5 V
Device interface	3.5 mm (1/8\
USB connector type	USB Type-C
Connectivity technology	Wired
Cables included	USB Type-C to USB Type-A
Number of products included	1 pc(s)
Type	PC microphone
Bit rate	24 bit
Sample rate	96 kHz
Volume control	Rotary
Voice coil type	Dynamic
Microphone frequency	20 - 20000 Hz
Microphone Total Harmonic Distortion (THD)	1 %
Output impedance	32 Ω

Weight and Dimensions

Height	142 mm
Diameter	52 mm
Microphone weight	373 g