The device must be installed only in a restricted access location that is compliant with ETS
300 253 guidelines where equipotential bonding has been implemented.
Open-source software may have been added and/or amended. For further information,
contact your AudioCodes sales representative.
Safety Precautions
◼ Do not open or dismantle the device.
◼ Do not expose the device to water or moisture.
◼ Make sure the device is installed in a well-ventilated location to avoid overheating of internal
components and subsequent damage.
◼ Make sure that sufficient clearance from the front and rear sides is maintained to ensure
proper airflow to avoid over heating of internal components.
◼ Operate the device in an ambient temperature (Ta) that does not exceed 40°C (104°F).
Warning: In case of a malfunction, do not attempt to fix the power adapter and do not use
any other type of power adapter.
MediaPack 5xx User's Manual Ver. 7.2
MSBR and MediaPack 5xx Series CLI Reference Guide Ver. 7.2
MSBR and MediaPack 5xx Series Release Notes Ver. 7.2
Documentation Feedback
AudioCodes continually strives to produce high quality documentation. If you have any comments
(suggestions or errors) regarding this document, please fill out the Documentation Feedback form on
our website at https://online.audiocodes.com/documentation-feedback.
To Next Page
Loading...
Need help?
General
