AudioEngine S8 User Manual

1. Connect the W3 power supply to the W3 Sender and plug the W3 power supply into a functioning AC power
outlet.
2. If your powered speakers or AV receiver has RCA-style audio outputs or sub outputs, connect the included RCA
adapter “Y” cable to the W3 Sender.
3. Connect an RCA cable (included with your powered speakers or AV receiver) between the RCA “Y” adapter
cable and your music source subwoofer out.
4. Connect the included mini-jack cable from the W3 Receiver to audio input on the rear panel of the 58 subwoofer.
5. Power on the S8 subwoofer.
The status indicators on the W3 Sender and Receiver will both blink briefly and will then go solid, indicating they are

AudioEngine S8 Specifications

General

Subwoofer type	Active subwoofer
Subwoofer peak power	250 W
Subwoofer sensitivity	88 dB
Subwoofer frequency range	27 - 180 Hz
Subwoofer crossover frequencies	50 - 130 Hz
Line-out	Yes
Line inputs (RCA)	1
AC input voltage	110 - 240 V
Power source type	AC
AC input frequency	50 - 60 Hz
Power consumption (standby)	8 W
Product color	White
Package weight	13600 g

Weight and Dimensions

Subwoofer width	280 mm
Subwoofer weight	12700 g