AudioEngine S8 User Manual

4) Connect the included mini-jack cable from the W3
Receiver to audio input on the rear panel of the S8
subwoofer.
5) Power on the S8 subwoofer.
The status indicators on the W3 Sender and Receiver will
both blink briefly and will then go solid, indicating they
are paired and ready to play your music.
S8 Wireless Troubleshooting Tips
The following troubleshooting tips can help diagnose and correct most concerns with the S8 Wireless. We have
attempted to make this list as comprehensive as possible, so some of these may not apply to your issue, but please
go through each tip.
If the power indicator on the S8 rear panel is not illuminated, try these tips:
1. Verify that the AC power cord is connected to the S8 rear panel and to a working AC power outlet.
2. Check that the power switch on the S8 rear panel is in the ON position and the volume control is not turned all
the way down.

AudioEngine S8 Specifications

General

Subwoofer type	Active subwoofer
Subwoofer peak power	250 W
Subwoofer sensitivity	88 dB
Subwoofer frequency range	27 - 180 Hz
Subwoofer crossover frequencies	50 - 130 Hz
Line-out	Yes
Line inputs (RCA)	1
AC input voltage	110 - 240 V
Power source type	AC
AC input frequency	50 - 60 Hz
Power consumption (standby)	8 W
Product color	White
Package weight	13600 g

Weight and Dimensions

Subwoofer width	280 mm
Subwoofer weight	12700 g