AudioEngine S8 User Manual

1. Connect an RCA stereo cable from an output of your stereo receiver, powered speakers, or any music system
with an output, to the S8 subwoofer input.
If your stereo receiver or music system has a single RCA sub out or LFE output, connect an RCA cable from this
output to the S8 sub RCA left (L) input.
S8 Wireless Quick Setup
The W3 Wireless Audio Adapter, which is part of the S8 Wireless Subwoofer system, will allow you to send music
wirelessly from any
music system with an audio output to the S8 Subwoofer.Here are the two most common setups to make your S8
subwoofer wireless using the included Audioengine W3 wireless adapter kit.
Music System to S8 Sub
using mini-jack audio output

AudioEngine S8 Specifications

General

Subwoofer type	Active subwoofer
Subwoofer peak power	250 W
Subwoofer sensitivity	88 dB
Subwoofer frequency range	27 - 180 Hz
Subwoofer crossover frequencies	50 - 130 Hz
Line-out	Yes
Line inputs (RCA)	1
AC input voltage	110 - 240 V
Power source type	AC
AC input frequency	50 - 60 Hz
Power consumption (standby)	8 W
Product color	White
Package weight	13600 g

Weight and Dimensions

Subwoofer width	280 mm
Subwoofer weight	12700 g