Audison AP8.9 bit User Manual

51
AP8.9 bit /
USER’S MANUAL
9. DRC - DIGITAL REMOTE CONTROL (OPTIONAL)
The volume can be adjusted by simply
turning the main knob or by pressing
the 1 button and turning the knob. The
volume ranges from -60 (min) to 0 dB
(max).
To access the Right / Left balance, press
the 2 button and turn the knob to adjust it.
To access the Front / Rear Fader, press
the 3 button and turn the knob to adjust it.
The independent volume for the
Subwoofer operates only if a channel
called Subwoofer was set up during
configuration. Press the 4 button and
turn the knob to adjust from -MUTE
(min) to 0 dB (from -11.5 to 0 dB at
0.5 steps).
Volume Control
Default function
The DRC is AP8.9 bit remote control system. It is a microprocessor digital system that can also remotely control and
monitor any amplifiers equipped with the AC Link bus control.
When first turned on, the display will show the Firmware version installed on the DRC.
When configuring AP8.9 bit using the PC, the DRC may stay connected but will show the message "PC control - DRC is
disabled" on the display.
Its functions are as follows:
- AP8.9 bit power on / off;
- Main volume control;
- Subwoofer volume control;
- Front/Rear Fader control;
- Connected sources selection;
- Memory selection.
1
2
3
4
MAIN SCREEN
PRESS PRESS
PRESS
Select
the Input.
DRC CONTROL DA PC
BACK TO MASTER
PRESS
TURN
1 2 3 4
Press Shorty
AP8.9 bit ON
AP8.9 bit
OFF
Press for 2 seconds
9

Audison AP8.9 bit Specifications

General

Brand	Audison
Model	AP8.9 bit
Category	Amplifier
Language	English