Standard di misura Audison Potenze misurate secondo lo standard Audison edizione 2005
- 12 VDC e 14.4 VDC;
- 1 kHz o frequenza di taglio del crossover;
- 0.3% THD @ potenza nominale; 1% THD @ potenza continua;
- Tolleranza: +10%, - 5%;
- Potenza continua misurata applicando una tensione RMS su carico resistivo;
- Potenza nominale misurata utilizzando una batteria da 12 VDC con un carico di 4 Ohm e tutti i canali in funzione.
Audison measurement standard Power measures taken according to Audison standard, 2005 edition
- 12 VDC and 14.4 VDC;
- 1 kHz or crossover cut-off frequency;
- 0.3% THD @ nominal power; 1% THD @ continuous power;
- Tolerance: +10%, -5%;
- Continuous power given by RMS Voltage measured on resistive load;
- The nominal power of the amplifier is measured upon a battery Voltage of 12 VDC with a 4 Ohm load and with
all channels in function.
10125290
CEA 2006 Specifications
CEA measurement standard
LRx 3.1MT
Output power @ 4 Ohms, ≤ 1% THD+N, 14.4 Volts:
• 100 W x 3 Ch + 400 W x 1 Ch
S/N ratio (ref. 1 W output):
• 100 W Channels: 80 dBA
• 400 W Channel: 58 dBA
LRx 5.1MT
Output power @ 4 Ohms, ≤ 1% THD+N, 14.4 Volts:
• 100 W x 5 Ch + 400 W x 1 Ch
S/N ratio (ref. 1 W output):
• 100 W Channels: 80 dBA
• 400 W Channel: 58 dBA
www.audison.com
Owner’s manual
The Universal Sound
To Next Page
Loading...
Need help?
General
