Axon Fleet 2 Camera System User Manual
Axon Enterprise, Inc. Page 17 of 22
Notification Reference Tables
Audio Prompts
The Axon Fleet system emits beeping sounds called “audio prompts” to notify you of the
system status. These audio prompts usually occur after a camera action.
Operating Mode Audio Notification
Powering on or off One beep
Recording an event Two beeps (repeats every 2 minutes)
Enter or exit Mute mode Two beeps
The device is ending an event and returning to BUFFERING
mode
One long beep
The camera is running off the Axon Fleer power unit (the car
ignition is off) and the battery is at 20% capacity or lower.
Four quick beeps (every 5 minutes)
The camera memory is full (the camera will not start
recording).
Three beeps.
LED Status
Operation LED
The operation LED displays the system’s current operating mode.
Operating Mode Operation LED
Recording Blinking red
Buffering Blinking green
Booting up/powering down Solid red
Function LED
The function LED displays when certain functions are enabled:
Function Enabled Function LED
Mute Blinking blue
Camera error* Solid red
Bluetooth feature is booting up Solid blue
Camera is searching for Wi-Fi Blinking magenta
Camera connected to Wi-Fi Solid magenta
* Use the power switch to turn the camera OFF and ON.
To Next Page
Loading...
Need help?
General
