BCS Two Wheel Tractor Power Unit
TWT/PU/0617 Page 11
For engine maintenance please refer to engine manufacturers manual.
After every hour of operation stop the engine and remove the spark plug cap.
Check engine oil level (recommended oil SAE 10w/40).
Replace the spark plug cap.
Do not turn the machine on its side for cleaning.
Before checking the oil level ensure the machine is level.
Remove the gearbox unit dipstick and ensure the oil reaches the top level mark, if necessary top
up with API GL-5 80w/90 gear oil (see page 13).
If the machine is not be used for a long period of time it is advisable to take the following
precautions:
• Empty the carburettor and fuel tank (refer to engine manual for details). Alternativelty, add
a fuel stabiliser.
• Empty the engine of oil.
• Petrol engine: lubricate the cylinder with a few drops of engine oil through the plug hole
then turn the engine over several times without starting it.
• Diesel engine: remove the injector by unscrewing the two bolts which fasten it to the head
and pour a little oil into the hole.
• Clean the engine and the machine thoroughly.
When restarting check that all security devices are working.
Maintenance Guide
Storage
To Next Page
Loading...
Need help?
General
