Beckhoff AX5000 Series Start-Up

BECKHOFF Drive Technology 4 Product description
AX5000 Version 2.5 17
4.4 Technical data
UL-Listing!
It is essential to observe chapter 3.3 if you wish to operate an AX5000 in an
economic area that requires a UL-Listing.
4.4.1 Permissible ambient and operating conditions
Ambient / operating conditions
Permissible values
Ambient temperature during operation
0 °C up to +40 °C
Up to 55 °C with reduced power (2 % / °C)
Ambient temperature during transport
-25 °C up to +70 °C
Ambient temperature during storage
-25 °C up to +55 °C
Air humidity
15 % up to 85 %, non-condensing
Pollution degree
2 according to EN 60664-1
Corrosion protection
Normally not required.
Under extreme operating conditions separate
measures must be agreed with the manufacturer.
Operating altitude
up to 1000 m above sea level without reduced power.
Between 1000 m and max. 3000 m with reduced
power 1.5 % per 100 m.
Installation position
vertical
Ventilation
Built-in temperature-controlled fan
Protection class
IP 20 except the terminals (IP00)
Vibration test (EN 60068-2-6)
Frequency range: 10-150 Hz
Amplitude: 10-58 Hz = 0,075 mm pk-pk
59-150 Hz = 1 g
4.4.2 Disposal
The device should be disposed of by a certified disposal company. You can obtain
addresses from us. Housing components (polycarbonate, polyamide (PA6.6)) are suitable
for plastic recycling.
Metal parts can be sent for metal recycling.
Electronic parts such as circuit boards and terminals must be disposed of in accordance with
national electronics scrap regulations.
In accordance with the WEEE 2012/96/EG Directives we take old devices and accessories
back for professional disposal, provided the transport costs are taken over by the sender.
Send the devices with the note “For disposal” to:
Beckhoff Automation GmbH & Co. KG
Huelshorstweg 20
D-33415 Verl

Beckhoff AX5000 Series Specifications

General

Brand	Beckhoff
Model	AX5000 Series
Category	Servo Drives
Language	English