Commissioning
C9900-G05x26 Version: 1.0
4 Commissioning
In order to use the device, you must first commission it. In the first step, this includes transporting and
unpacking the components. This is followed by the mounting of the device on the mounting arm adapter, the
connection of the cables and the power supply and finally switching on the push-button extension.
4.1 Transport and unpacking
The specified storage conditions must be adhered to (see chapter 8 Technical data [}32]).
Despite the robust design of the unit, the components are sensitive to strong vibrations and impacts.
Therefore, protect the push-button extension against high mechanical stress. Use the original packaging for
shipping.
NOTE
Risk of damage to the compact push-button extension
When transporting in cold weather or when the push-button extension is exposed to extreme temperature
fluctuations, make sure that no moisture (condensation) collects on and in the push-button extension.
Unpacking
Proceed as follows to unpack the unit:
1. Remove packaging.
2. Keep the packaging for possible future transport.
3. Check your delivery for completeness by comparing it with your order.
4. Be sure to keep the documents supplied with the device. They contain important information about how
to use your device.
5. Check the contents for visible shipping damage.
6. In case of discrepancies between the package contents and the order, or in case of transport damage,
please inform Beckhoff Service (see chapter 9.1 Service and support [}33]).
To Next Page
Loading...
Need help?
General
