Beckhoff KL2 Series User Manual

Product overview
KL2xxx and KS2xxx10 Version: 3.0.0
Two-channel, digital output terminal, 24V
DC
The KL2012, KL2022 and KL2032 digital output terminals connect the binary control signals from the
automation unit on to the actuators at the process level with electrical isolation. The KL2012 and KL2022
versions handle different load currents, and their outputs are protected against overload (only KL2012) and
short circuit. The KL2032 Bus Terminal is protected against reverse polarity connection. The Bus Terminals
contain two channels that indicate their signal state by means of light emitting diodes.
2.2.1 KL2012, KL2022, KL2032 - Technical data
Technical data KL2012, KS2012 KL2022, KS2022 KL2032, KS2032
Connection technology 4 wire
Number of outputs 2
Nominal voltage 24V
DC
(-15%/+20%)
Load type ohmic, inductive, lamp load
Max. output current (per channel) 0.5A (short-circuit
proof)
2.0A (short-circuit
proof)
0.5A (short-circuit
proof)
Max. short-circuit current <2A <70A <2A
Inductive breaking energy max. <150mJ/channel <1.7J/channel <150mJ/channel
Reverse polarity protection no no yes
Electrical isolation 500V (K-bus / field voltage)
Current consumption via K-bus typ. 5mA
Current consumption power contacts typ.15mA + load typ.20mA+load typ.20mA+load
Bit width in process image 2 outputs
Configuration no address or configuration settings required
Dimensions (WxHxD) 15mmx100mmx70mm (width aligned 12mm)
Weight approx. 55g
Permissible ambient temperature
during operation
0°C ... +55°C -25°C ... +60°C
(extended
temperature range)
Permissible ambient temperature
during storage
-25°C ... +85°C -40°C ... +85°C
Permissible relative humidity 95%, no condensation
Vibration / shock resistance according to EN 60068-2-6 / EN 60068-2-27, refer also to
Installation instructions for enhanced mechanical load capacity
[}29]
EMC immunity/emission conforms to EN 61000-6-2 / EN 61000-6-4
Installation position variable
Protection class IP20
Pluggable wiring for all KSxxxx Bus Terminals
Markings/ Approvals
CE, cULus, ATEX
[}33]
CE, cULus, ATEX [}33], GL

Beckhoff KL2 Series Specifications

General

Brand	Beckhoff
Model	KL2 Series
Category	Touch terminals
Language	English