2
SECTIONSTable of Contents 1 2 3 4 5 6 7 8SECTIONSTable of Contents 1 2 3 4 5 6 7 8
9
INTRODUCTION
Belkin® Advanced 4-port Secure DVI-I KVM Switch with DCU User Manual
Safety Precautions
Please read the following safety precautions carefully before using
the product:
• Before cleaning, disconnect the product from the coupled
power supply.
• Be sure not to expose the product to excessive humidity.
• Do not store or use for extensive period of time in extreme thermal
conditions—it may shorten product lifetime.
• Be sure to install the product on a clean secure surface.
• Do not place the DCU cable in a path of foot traffic.
• If the product is not used for a long period of time, remove the
KVM’s wall-mount power supply from the mains jack.
• If one of the following situations occurs, get the product checked by
a qualified service technician:
o Liquid penetrates the product’s case.
o The product is exposed to excessive moisture or water.
o The product is not working well even after carefully following the
instructions in this user’s manual.
o The product has been dropped or is physically damaged.
o The product has obvious signs of breakage or loose
internal parts.
o Power supply overheated, broken, damaged or has
a damaged cable.
• The product should be stored and used only in temperature and
humidity controlled environments as defined in the product’s
environmental specifications.
• Product contains internal battery. Battery is non-replaceable. Never
attempt to replace battery as any attempt to open product enclosure
would permanently damage the product.
To Next Page
Loading...
Need help?
General