1
2
3
4
5
6
section
2
1-2 Features Overview Overview
• Remote Access
The RIPM provides remote access to your KVM configuration and all
connected servers. It also sets up to provide remote access to an individual
computer or server.
• Digital Users
The RIPM allows one digital user to access and control connected KVM
switches and servers. It also enables an additional 25 users to simultaneously
view digital video for collaborative troubleshooting.
• Web-Browser Based
The RIPM’s interface is web-browser-based; any computer can access it, as
long as it is connected to the LAN, WAN, or Internet over a standard TCP/IP
connection. Setup requires no additional software.
• User-Friendly Interface
The user-friendly interface allows you to set up and change the RIPM’s
functions quickly and easily through your web browser, without having to
install additional software onto your computer.
• BIOS-Level Access
The RIPM allows you to access the basic input/output system (BIOS) of your
servers to make adjustments and perform reboots.
• Serial Device Support
The RIPM provides support for one serial device, such as a power distribution
unit (PDU), so you can perform hard reboots of your servers remotely.
• Enhanced Security
The RIPM provides 256-bit SSL encryption and multi-user password
protection to prevent unauthorized access to your servers.
• Virtual Media*
With virtual-media capability, you can transfer images and files between local
and remote computers, remotely load software, perform application and
operating-system patches, and perform diagnostic testing from a CD.
*Available on Windows
®
-based computers only.
To Next Page
Loading...
Need help?
General