14 How to assemble your monitor hardware
Using the monitor wall mounting kit
The back of your LCD monitor has a VESA standard mount with 100mm pattern, allowing the
installation of a wall mount bracket. Before starting to install a monitor wall mounting kit, please
read the precautions carefully.
Precautions:
• Install your monitor and monitor mounting kit on a wall with flat surface.
• Ensure that the wall material is stable to support the weight of the monitor.
• Turn off the monitor and the power before disconnecting the cables from the LCD monitor.
1. Remove the monitor base.
Lay the screen face down on a clean and well-padded
surface. Detach the monitor base as instructed in
How to detach the stand base on page 13.
2. Remove the monitor stand.
Use a a cross-pointed screwdriver to release the
screws that fixing the monitor stand to the monitor.
The use of a magnetic-head screwdriver is
recommended to avoid of losing the screws.
Then pull the monitor stand backward away from
the monitor.
In case you intend to use your monitor on the stand in
the future, please keep the monitor base, monitor stand,
and screws somewhere safe for future use.
3. Follow the instruction manuals of the wall mount
bracket you purchased to complete the installation.
Downloaded from ManualMonitor.com Manuals
To Next Page
Loading...
Need help?
General
Weight and Dimensions
