CD/MP3/WMA/iPod mode Bluetooth*
Ejecting a CD
Note:
You must not hinder or assist the drive as it
ejects the CD.
Press the
button
8
to eject an inserted
CD.
Notes:
• If a CD is ejected and not removed, the
drive will automatically draw it back in
again after approx. 10 seconds.
• You can also eject CDs while the car sound
or whilst another au-
dio source is activated.
ENGLISH
Bluetooth® menu
nd all the functions
for pairing, connecting and managing Bluetooth®
devices.
Calling the Bluetooth® menu
y press the MENU button
2
to open
the user menu.
7
until the "BLUE-
TOOTH" menu item is selected.
Press the rotary control
7
to open the Blue-
tooth® menu.
7
until the desired
menu item is selected.
Perform the setting (see the following sec-
tions).
y press the MENU button
2
to exit the
menu.
Notes:
• The Bluetooth® menu is automatically ex-
ited approx. 30 seconds after the last but-
ton activation and you are returned to the
display of the current audio source.
• To go back to the next higher-level menu,
turn the rotary control
7
until the "<<<"
option is selected and press the rotary con-
trol
7
.
• If a Bluetooth® process is running (e.g.
re-establishing the connection to the last
connected device), the functions of the
Bluetooth® menu are blocked. If you at-
tempt to open the Bluetooth® menu dur-
y appears
on the display. If you want to cancel the
Bluetooth® process and open the Blue-
tooth® menu, press the
but12 ton
<
.
Pairing and connecting a device
Note:
You can pair up to 5 Bluetooth® devices with
this car sound system. Before you can pair a
rst unpair one of the
5 already paired devices (see ch. "Additional
functions in the Bluetooth® menu", section
"Managing paired devices").
If you should attempt to pair a sixth Blue-
tooth® device, "PHONE LIST FULL – PLEASE
DELETE ENTRIES FROM LIST" is displayed.
Pairing and connecting a cell phone
Note:
If a connection with a cell phone currently ex-
ists, this connection is automatically discon-
nected if you pair and connect another cell
phone.
In the Bluetooth® menu, select the "PAIRING"
menu item.
Press the rotary control
7
to open the menu.
The "MOBILE PHONE" menu item is selected.
Press the rotary control
7
to register a cell
phone.
The display intermittently shows "ENTER PIN"
and the currently stored PIN (default "1234").
In addition, the Bluetooth® icon
ashes. The
car sound system can now be recognised by a
Bluetooth® cell phone for approx. 2 minutes
and connected.
Search the car sound system from your cell
phone (Bluetooth® name: "BP 440 BT") and
establish the connection. Enter the PIN dis-
played by the car sound system, if necessary.
The display may show "PAIRED", followed by
"CONNECTED", as soon as the car sound sys-
tem and the cell phone are paired and con-
nected.
To Next Page
Loading...
Need help?
General
