10
CD/MP3/WMA mode
Basic information
Helsinki 220 BT and London 120:
This car sound system can be used to play audio
CDs (CDDA) and CD-R/RWs with audio, MP3 or
WMA les as well as MP3 or WMA les on USB data
carriers.
Sydney 220 BT and Melbourne 120:
This car sound system can be used to play MP3 or
WMA les on USB data carriers and SD(HC)/MMC
cards.
Notes:
• To ensure proper functioning, use only CDs
with the Compact-Disc logo.
• Blaupunkt cannot guarantee the awless
function of copy-protected CDs and all
CD blanks, USB data carriers and memory
cards available on the market.
Note the following information when preparing
an MP3/WMA data carrier:
• Naming of tracks and directories:
– Max. 32 characters without the le exten-
sion ".mp3" or ".wma" (the use of more
characters reduces the number of tracks
and folders that the car sound system can
recognise)
– No umlauts or special characters
• CD formats: audio CD (CDDA), CD-R/RW,
Ø: 12 cm
• CD data formats: ISO 9669 Level 1 and 2, Joliet
• CD burn speed: Max. 16x (recommended)
• USB format/ le system: Mass storage device /
FAT16/32
• Memory card le system: FAT16/32
• File extension of audio les:
– .MP3 for MP3 les
– .WMA for WMA les
•WMA les only without Digital Rights Manage-
ment (DRM) and created with Windows Media
Player version 8 or later
• MP3 ID3 tags: Version 1 and 2
• Bitrate for creating audio les:
– MP3: 32 to 320 kbps
– WMA: 32 to 192 kbps
• Maximum number of les and directories:
– USB medium: Up to 20,000 entries de-
pending on the data structure
– Memory cards: Up to 1,500 les (directories
and tracks) per directory
Changing to CD/MP3/WMA mode
쏅 Press the SRC button
@
repeatedly until the
desired audio source is displayed:
• "CD": Inserted CD
(Helsinki 220 BT and London 120)
• "SD(HC)": Inserted memory card
(Sydney 220 BT and Melbourne 120)
• "USB": Connected USB data carrier
• "AUX": Connected external audio source
Notes:
• The respective audio source can be se-
lected only if a corresponding data carrier
is inserted or a corresponding device is
connected.
• If the car sound system rst has to read
the data of a connected device or data car-
rier before the playback, the display shows
"READING". The duration of the reading
depends on the data volume and design of
the device or data carrier. If the device or
data carrier is defective or the transferred
data cannot be played back, a correspond-
ing message appears on the display (e. g.
"USB ERROR").
• This car sound system cannot be used for
charging USB device or mobile phone.
CD/MP3/WMA mode
To Next Page
Loading...
Need help?
General
Weight and Dimensions
