Headlight
Adjusting headlight for
RHD/LHD traffic
This motorcycle's headlight fea-
tures a symmetrical low beam.
No special adjustments or prece-
dures are required prior to oper-
ating the motorcycle in a country
where traffic uses the opposite
side of the road (left-hand drive
to right-hand drive or vice versa).
Headlight range and
spring preload
The headlight range generally
remains constant due to the ad-
justment of the spring preload to
the loading state.
Spring preload adjustment may
only be insufficient when the mo-
torcycle is very heavily loaded.
In this case, the headlight range
must be adjusted to the weight.
If there are questions
whether the headlight
range is correct, consult a
specialized workshop, preferably
an authorized BMW Motorrad
retailer.
Adjusting headlight range
Loosen screws 1 on left and
right.
Adjust headlight by tilting
slightly.
Tighten screws 1 on left and
right.
Seat
Remove seat
Make sure ground is level and
firm and park motorcycle.
Turn storage compartment
lock 1 to right with motorcy-
cle key.
Take off cover 2.
4
38
z
Operation
To Next Page
Loading...
Need help?
General
