Symbol Function
With the lights switched on:
Dimming instrument lighting,
refer to page 83
Calling up Check Control, refer
to page 77
Checking the engine oil level,
refer to page 239
Setting the time, refer to
page 72
Setting the date, refer to
page 73
Viewing service requirement
display, refer to page 75
Exiting displays
The external temperature reading and the time
reappear when you press button 2 or if you make
no entries within approx. 15 seconds. If required,
complete the current setting first.
Units of measure
The units for fuel consumption, route/distance,
temperature, and pressure can be changed.
1. "Settings"
2. "Language/Units"
3. Select the desired menu item.
4. Select the desired unit.
The settings are stored for the remote control
currently in use.
Clock
Setting the time
In the instrument cluster
To set the 12h/24h format, refer to Setting the
time format below.
1.
Press button 1 in the turn indicator lever up
or down repeatedly until the appropriate
symbol appears in the display, accompanied
by the time and the word "SET".
2. Press button 2.
Seite 72
Controls Displays
72
Online Edition for Part no. 01 40 2 914 595 - VI/12
To Next Page
Loading...
Need help?
General
