167
Entertainment OverviewControlsDriving hintsNavigationMobilityReference
Changing memory location
1. Select "Memorised stations" and press the
controller.
2. Select the desired station.
"Set" is selected.
3. Press the controller.
Further menu items are displayed.
4. Select "Save" and press the controller.
5. Turn the controller until the desired mem-
ory location is selected.
The number of the memory location is dis-
played next to the name or frequency of the
station.
6. Press the controller.
The station is now memorised.
Radio Data System RDS
RDS broadcasts additional information on the
VHF/FM waveband. RDS stations therefore
offer the following features:
> Where a radio station is broadcast on sev-
eral frequencies, the set automatically
switches to whichever frequency offers the
best reception.
> Where reception conditions are good, the
names of stations are displayed on the con-
trol display. Where reception is poor or in
the event of interference, it may take some
time before the station names will appear in
the display.
Switching RDS on/off*
1. Select "FM" or "AM" and press the control-
ler.
"Set" is selected.
2. Press the controller.
Further menu items are displayed.
3. Select "RDS" and press the controller.
RDS is switched on.
Automatically sorting
stations*
For the selection criterion "All stations", you
can program whether the most frequently used
stations are displayed first.
1. Select "All stations" and press the control-
ler.
"Set" is selected.
2. Select "Favourites" and press the control-
ler.
The most frequently used stations are dis-
played first.
To Next Page
Loading...
Need help?
General
