Securing the E-Scooter
for transportation
Make sure that all components
that might come into contact
with straps used to secure the
motorcycle are adequately pro-
tected against scratching (e.g.
with adhesive tape).
ATTENTION
Vehicle topples to side when
being lifted on to stand
Risk of damage to parts if vehicle
topples
Secure the vehicle to prevent it
toppling, preferably with the as-
sistance of a second person.
Push the E-Scooter onto the
transportation surface and hold
it in position: do not place it on
the side stand or centre stand.
ATTENTION
Trapping of components
Component damage
Do not trap components such
as brake lines or cable legs.
At the front, loop a strap over
the bottom fork bridge on each
side and tension.
Fasten the tensioning strap at
the rear right on the retaining
panel for the footrest.
7
87
z
Riding
To Next Page
Loading...
Need help?
General
