OFF: operation of stopwatch
with button 2 in instrument
cluster.
To save the setting made,
press and hold button 1 and
button 2 simultaneously until
the display changes.
Lights
Parking lights
The parking lights switch on au-
tomatically when the ignition is
switched on.
The parking lights are a
strain on the battery. Do
not leave the ignition switched
on longer than absolutely
necessary.
Low-beam headlight
The low-beam headlight switches
on automatically when you start
the engine.
With the engine switched
off, you can switch on the
lights by switching on the high-
beam headlight with the ignition
switched on or by operating the
headlight flasher.
Headlight high beam and
flasher
Press switch 1 at top to switch
on high-beam headlight.
Move switch 1 onto center po-
sition to switch off high-beam
headlight.
Pull switch 1 at bottom to op-
erate headlight flasher.
Parking light
Switch off ignition.
Immediately after switching off
the ignition press the 1 button
and maintain pressure until the
parking lights come on.
Switch ignition on and then
off again to switch off parking
lights.
Turn signals
Operating turn signal
Switch on ignition.
4
39
z
Operation
To Next Page
Loading...
Need help?
General
